AERO-LIFT FORCE-LIFT, Instruction Manual

Page: 13 / 51

LIST OF CONTENS
FORCE-LIFT
®
13/51
vacuum and thus causes the lift tube to expand lengthwise and the control head with the suction
foot and the product being transported to be lowered. Conversely, the vacuum increases with the
reduction of external air, which in turn causes the lift tube to be tensioned and contract in terms
of length - the control head with the suction foot and the product to be transported raises up.
Consequently, the product being transported can be held suspended in the air by stopping the
addition of external air to a certain extent.
Quick-change coupling, swivelling and rotating function
A quick-change coupling is available to ensure that the operator can change the suction foot in
seconds. The suction foot can also be swivelled manually by 90°.
There is also a 360° rotating function for turning the product being transported. This allows the
product to be rotated continuously.
Operator controls
(1) Quick release button
(2) Automatic unlock and suspend
function
(3) Regulating screw for transport
goods
(4) Lock mechanism quick-change
coupling
(5) 360° rotating function
(6) Lift/lower control button
The FORCE-LIFT
®
is operated with only one hand with the control head.
The load is lifted up using the “Lift/Lower” button (6). If it is released slowly, the load moves
downward again. The unlock button (2) must be pressed to unlock. It is used as a safety lock
mechanism for the lowering function. If it is released suddenly, the load stays at the selected
height.
The release button (1) is used to quickly and easily release the load from the suction foot (quick
release).