AERO-LIFT FORCE-LIFT, Instruction Manual

Page: 16 / 51

STRUCTURE AND FUNCTION
16/51 FORCE-LIFT
®
Lift tube
(1) Lift tube
(2) Clamp for fastening
(3) Control head
The lift tube (1) is used to raise, hold and lower the product to be transported. The lift tube is
suspended from a swivel joint with an eyelet on the crane. It is fastened to the control head (3)
with a clamp (2) on the bottom.
The lift tube rises when the vacuum is generated or increases and lowers when the vacuum
decreases. If the vacuum supply stops or the blower fails, it sinks slowly downward with the
product to be transported.
Suction feet (options)
Double rectangular suction foot
(1) Cardboard suction foot
(2) Suction plate
(3) Adjustment of suction foot
The card board suction food is an adjustable double-rectangular suction foot for transport goods
surfaces that are not inherently stable. It is mounted so that it can tilt and is specially designed for
handling boxes or steel plates and similar.
It consists of two suction plates (2). They can be adjusted in width with the adjustment (3) to adapt
to the width of the products to be transported.
Round suction foot