AERO-LIFT FORCE-LIFT, Instruction Manual

Page: 23 / 51

LIST OF CONTENS
FORCE-LIFT
®
23/51
WARNING!
Moving parts!
Crushing of fingers/ hands can lead to injuries when moving or adjusting the suction
plate position.
✓
Do NOT touch or reach between individual suction plates (double-rectangular
suction foot), quick-changing coupling and suction foot or between other
components!
✓
When moving, keep the one hand on the control head and the other hand on
the product being transported.
✓
Always wear personal protective equipment when installing and making
adjustments!
Raise the vacuum lifter with the product being transported (7) by pressing the unlock button
(2) and the button (4).
Position the product being transported (7) over the spot where it is to be put down.
Slowly release the button (4) to lower the product being transported (7) to the desired
position.
Use the release button (1) in order to release the product being transported (7) from the
vacuum lifter.
→ The product to be transported was transported using the vacuum tube lifter.
Fastening/changing the suction foot
WARNING!
Moving parts!
Crushing of fingers / hands when moving or adjusting the position of the suction plates,
during maintenance, mounting or operation may lead to injuries.
✓
Do NOT touch or reach between individual suction feet (double-rectangular
suction foot), quick-changing coupling and suction foot or between other
components!
✓
Carefully install the vacuum lifter.
✓
When moving, keep the one hand on the control head and the other hand on
the product being transported.
✓
Always wear personal protective equipment when installing and making
adjustments!
Requirements
1. Vacuum lifter mounted and suspended
2. Suction foot to be changed is available, functional and placed on a base
3. Raise the vacuum lifter (1) by pressing the unlock button (4) and the button (2). Release the
unlock button (2) at the required height.