8
2.3 BACK-LIGHTING
Among the general setting page, when "Back light" is set to "Energy save", the display panel will light off when there is no operation in 5 minutes. However, it will light on again
by touching any valid area. When "Back light" is set to "Lighted", the display panel will be kept lighting on. It is suggested to set it to "Energy save" so as to extend its service life.
3
BASIC FUNCTIONS
3.1 SWITCHING THE UNIT ON AND OFF (ON/OFF)
16:41
2017-05-04 Fri.
Function
Parameter
View
Commission
General
To switch the unit on or off, press the flag shown in the figure; once this is done, the system will ask for confirmation of the switching on or off through another window where
the on/off command can be confirmed or cancelled.
Note:
1.
Once the voltage supply has been connected for the first start-up, this function will be set on “Off”;
2.
ON/OFF operation will be memorized by setting "On/Off Memory" to be "On" at the General menu.
That is, in case of power failure the unit will resume running upon power recovery. Once "On/Off Memory" is set to be "Off", in case of power failure the unit will keep "Off"
upon power recovery.
3.2 SELECTING A MENU
16:41
2017-05-04 Fri.
Function
Parameter
View
Commission
General
To enter one of the menus available to the user; click on the corresponding icon; on entering them, each menu (depending on the one selected) will allow you to browse the
various pages or enter other sub-menus linked to specific functions.
Press the HOME icon to return to the main page.
