25
The Elite T3 will enter POST DIVE SURFACE MODE following a
dive upon ascent to 4 FT (1.2 M). The Surface Interval Time
colon will flash during the first 10 minutes after a NORM/GAUG
dive (Fig. 16), or first 1 minute after a FREE dive.
During the first 2 hours after a dive, the SURF MAIN screen for
the Operating Mode selected prior to the dive (NORM, GAUG,
or FREE) remains on display as the Default SURF MAIN screen.
NORM SURF MAIN, information provided includes (Fig. 17):
> Graphic NORM alternating with the Altitude Level graphic
SEA (or EL2 through EL13) and WET (if the unit is wet),
each On 3 seconds then 1/4 second blank.
> Battery icon if an Elite T3 Low Battery Warning Condition
exists, flashing if Too Low
> Tank Pressure and symbol PSI (or BAR), if the Receiver is
successfully Linked with an active Transmitter.
> Symbol DIVE and Number of that dive (0 if no dive has
been made yet).
> Symbols TIME and SURF, and Surface Interval (hr:min).
> NITROX symbol, if any GAS is set for a Nitrox dive.
> Tank 1 icon representing GAS 1, which is the default start
Gas and default Gas 10 minutes after a dive.
> NIBG if any after a NORM or FREE dive.
> O2BG if any after a NORM Nitrox dive.
Fig. 16 - NORM SURF MAIN
(post dive, unit wet)
Fig. 17 - NORM SURF MAIN
(no dive made yet, dry)
