19
PC INTERFACE
Interface with a PC is accomplished by connecting the Elite T3 to a PC USB Port using the
USB Interface Cable provided. The same Cable is used for Upload and Download.
The software program is on the AERIS Computer Interface CD provided, together with a
USB Driver. The program's Help section serves as the User Manual and can be printed for
personal use. The Settings Upload program is used to check the Elite T3's existing Settings
and for entering settings into the Elite T3. The Data Download program is used to retrieve
Data that was sampled during dives and stored in the Elite T3's memory.
The Elite T3 checks for an External Access request once every second while in Surface
Mode. Checks are not made if the unit is WET. For a connection to be made, the Inter-
face Cable is plugged into the Elite T3's Data Port and plugged into a PC USB Port. To
establish the connection, the PC program must be running. When the connection is made,
all segments of the Elite T3 appear on the display until completion of the Upload or Down-
load operation.
The Elite T3 reverts to the Surface Mode Main screen after completion of the Upload
or Download operation, or after 2 minutes if no PC action was taken.
SYMBOLS AND ALPHA NUMERIC GRAPHICS
The upper line of digits on the LCD screen is used to convey alpha Messages such as Day
of the Week, Operating Modes, items being Set, Gas and Transmitter identification,
Altitude level, and Alarm identification. At times, the second line is also used to display
alpha numeric graphics such as PO2 and On/Off. The FO2 setting of a selected Gas will
appear in the lower line.
