AM Series Boilers and Water Heaters
CHAPTER 3: INSTALLATION - SITE
Page
24
of
154
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0100_0D
03/28/16
Ph.: 800-526-0288
GF-146
3.10.1 Transporting a Standard AM Unit
Transport a
standard
AM boiler or water heater to its installation location as follows.
Transporting a
Standard AM Water Heater or Boiler
1. Remove the lower cover “A” at front of the AM unit by pulling it off.
2. Remove the screw & washer “B” (Figure 3-4), which fastens the pallet to the unit front.
Figure 3-4: Removing the Unit Front from Wood Pallet
3. Remove the screw and washer “C” (Figure 3-5), which fastens the pallet to the unit rear.
Figure 3-5: Removing the Unit rear from Wood Pallet
4. Install the two factory supplied eyebolts “D” on the upper side of the unit and attach
chains or straps to lifting ring/hook “E” as shown in Figure 3-6.
Figure 3-6: Removing the Unit from Wood Pallet (Lifting)
A
E
C
D
B