AM Series Boilers and Water Heaters
CHAPTER 10 – MAINTENANCE
OMM-0100_0D
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
Page
117
of
154
GF-146
Ph.: 800-526-0288
03/28/16
10.14 Removing the Unit Covers
In order to remove the unit covers, refer to Figure 10-1 and follow the steps below:
Removing the Unit Covers
1. Lift up, by hand, the Top Cover “A”.
2. Remove two Front Cover screws “B”.
3. Pull back the upper part of Front Cover “C” for 2 inches, then pull it up for one inch
and remove it from the unit.
4. Pull back upper part of Bottom Cover “D” for 2 inches, then pull it up for one inch
and remove it from the unit.
5. To gain access to the junction box:
a) Remove the Junction Box Cover screw “E” at rear of cover.
b) Remove Junction Box cover “F”.
Figure 10-1: Removing the Top and Front Covers
(F)
Junction
Box Cover
(A)
Top Cover
(C)
Front Cover
(D)
Bottom Cover
(E)
Junction Box Screw
(B)
Front Cover
Screws (2 each)
