AEMC 203, User Manual

Page: 31 / 44

31
4 SPECIFICATIONS
4.1 REFERENCE CONDITIONS
Quantities of Influence Reference Conditions
Temperature: 23°C ±2°C
Relative humidity: 45% to 75%
Supply voltage: 9.0V ±0.5V
Frequency range of the applied signal: 45 to 65Hz
Sine wave: pure
Peak factor of the applied alternating signal: √2
Position of the conductor in the clamp: centered
Adjacent conductors: none
Alternating magnetic field: none
Electric field: none
4.2 SPECIFICATIONS UNDER THE REFERENCE CONDITIONS
Accuracy is expressed in ± (x% of the reading (R) + y counts (ct)).
4.2.1 DC Voltage Measurement
Measurement range 0.00 to 59.99V 60.0 to 599.9V 600 to 1000V
(1)
Specified
measurement range
0 to 100% of the measurement range
Accuracy
from 0.00V to 5.99V
±(1% R + 10cts)
from 6.00V to 59.99V
±(1% R +3cts)
±(1% R +3cts)
Resolution 0.01V 0.1V 1V
Input impedance
10M Ω
Note (1) The display indicates "+OL" above + 2000V and "-OL"
below – 2000V, in REL mode. The "-" and "+" signs are managed.
Above 1000V, a repetitive beep indicates that the voltage being
measured is greater than the safety voltage for which the device is
guaranteed. The display indicates "OL.”