AEM LAMBECHT METEO 00.95800.010000, Manual

Page: 26 / 60

26
In case of modification of the log list after storage of a configuration and rebooting of the met[LOG], all
log files (BIN files) which have been stored until the configuration will be deleted at the next storing/re-
booting. This is necessary as the sensor assignment of the measuring values stored in the log data
otherwise is no longer valid. In case these values be required, they must be exported before. An export
can be made via CSV-file or with the LAMBRECHT evaluation and visualisation software MeteoWare
CS3.
Name, the unit which has to be stored and the number of the decimal places can be adjusted in the log
list.
The unit can be assigned freely. For future evaluations, e.g. with the MeteoWare CS, we recommend
to use the units according to the following list:
List of the recommended units:
Parameter Unit
absolute humidity g/m³
Air pressure hPa
Air pressure Inch Hg
Temperature °C
Dew point °C
rel. Humidity %
Wind speed m/s
Wind speed km/h
Wind speed kt (at Sea / at Nato planes)
Wind direction ° / degree
Heading ° / degree
Course ° / degree
Boat speed Kt
Voltage V
Voltage MV
Current A
Current MA
Frequency Hz
Resistance Ohm
Visibility m / km
Ceiling m / feet
Leaf wetness %
Precipitation mm/m²
Global radiation W/m²
Net radiation W/m²
rain[e] Heating %
Sunshine duration %
Sunshine duration Minutes
Brightness Klx
Event %
Status %