25
3.3. Configuration of the data storage
For data storage, the storage interval (equals mean value interval) has to be adjusted. 1, 2, 5 or 10
minutes can be selected.
Via drag ‘n’ drop or via the „+“ button, sensor parameters from the sensor list can be dragged into the
log list. The sensor parameter list is a result from the configuration of the “analogue/digital inputs” and
configuration of the telegrams at COM-interfaces. All parameters in the log list will be stored according
to the adjusted storage interval as mean value, minimum value, and maximum value (please see
chapter 10)
If available, virtual parameters from the list of the virtual sensors can be put and stored in the log list.
The virtual sensors result from the configuration of the visualization.
Sensors which are inside the log list are shown in grey in the original list and cannot be moved back
into the log list.
Via the dustbin button the logged sensors can be removed from the log list.
ATTENTION !
At passive signal, the power supply in the met[LOG] will be interconnected as switch-
ing voltage.
