2
Features - Overview
•
Connection of serial LAMBRECHT sensors
•
Parallel connection of up to 3 talker sensors (one per COM port)
•
Connection of 4 analogue/digital sensors
o
Temperature measurement via NTC temperature sensors
o
Direct connection of sensors with Open Collector or Relay output
o
Connection of sensors with voltage output
•
Connection of LAMBRECHT precipitation sensors with impulse output
o
Integrated intensity-dependent linearisation of the precipitation amount
•
Data saving via SD card
•
Vectorial link of wind direction and speed selectable
•
Transfer of data to MeteoWare CS3
•
Visualisation of real values and progressions via integrated web page
o
Gauges for wind direction and speed
o
Development display for temperature, humidity, pressure, radiation, precipitation
amount
o
Trend display for temperature, humidity, pressure
o
Status display for sunshine and rain
o
Calculation and display of wind peak and maximum gust
o
Calculation and display of heat index/humidex or wind chill
o
Calculation of dew point
o
Calculation of absolute air humidity
o
Altitude correction of air pressure (QFE)
o
Calculation of air pressure at sea level (QNH or QFF)
o
Calculation of sunshine duration per day
o
Calculation of precipitation duration per day
•
Alarms via 4 digital outputs
o
Warnings depending on wind direction possible
o
8 warning channels that can be connected logical (AND/OR) with each other
o
Configuration of alarms via integrated web page
o
Hysteresis function or window function
o
Logic test of configured alarms
o
Function test of digital outputs via button press (software)
•
Configuration of met[LOG] via integrated web page
o
Configuration of data savings
o
Configuration of visualisation
o
Automatic settings of time and date at connection to time server
•
Auto-configuration mode at connection of serial LAMBRECHT sensors
•
Different languages selectable (German / English)
•
Connection of rain[e]
o
rain[e] talker protocol
o
rain[e] SDI-12 to RS485
•
Simple firmware update via SD card
