47
Connecting the vacuuming hose, pressure hose and vacuuming
pipes
0
Insert the hose inserts into the suction hole as in
the picture and turn it to the right until it locks
into place.
To remove the vacuuming hose, twist the hose
inserts to the left and remove. Then firmly press
the end of the thin pressure hose into the quick
disconnect coupler located on the motor head
until the coupler clicks into place.
0
Press the pressure hose into the clips and secure
these to the vacuuming hose such that they are
evenly spaced.
0
At the other end of the vacuuming hose connect
the two vacuuming pipes to the handle, by first
connecting the pipe without hook-in pins and
then the one with pins.
Insert the shut-off valve located on the pressure
hose into the track located on the upper
vacuuming pipe as far as it will go. Then turn the
vacuuming pipe such that the shut-off valve is
located on the underside of the handle.
Align the second lower vacuuming pipe such that the clamping pieces
for the pressure hose are located on the same side as for the upper
pipe.
Summary of Contents for VAMPYR Multi
Page 2: ...32 ...
Page 29: ...59 Wet and dry multi purpose nozzle ET no 668 900 830 Bevelled pipe nozzle ET no 668 900 828 ...
Page 30: ...118 ...
Page 31: ......
