AEG VAMPYR Multi, Operating Instructions Manual

Page: 15 / 32

45
Switching on the appliance
0
Before commencing wet vacuuming always remove the paper filter and
the foam filter.
0
The rotary switch must be pointing to ”0”.
The rocker switch must be pressed in the
direction of the flooring nozzle symbol ”
”.
Plug the cable into the power outlet:
To switch the appliance on, turn the rotary
switch to the ”I” symbol.
Important: The rocker switch must not be
illuminated.
Regulating the suction power
The suction power can be decreased by
actuating the suction power regulator located
on the handle of the vacuuming hose.
Slider for regulating the suction power
– closed = full suction power
– open = decreased suction power
After wet vacuuming
0 Turn the rotary switch to ”0” and disconnect the power plug.
Empty the dust container and clean it and the components used with
warm soapy water and let them dry; in particular this should be done
after vacuuming up sticky liquids. Prior to being reassembled, all
appliance parts must be totally dry.
0 Coil the cable in large loops and hang it on the
cable cradle located on the carry handle. The
vacuuming pipe can be hung on the mountings
on the motor head together with the nozzle and
hose.