54
Cleaning the cables, pumps, valves and spray nozzles
0
For practical reasons this cleaning is carried out directly after the
appliance has been used for spray vacuuming.
Pour approx. 2 litres of water into the detergent tank, place this into
the dust container and attach the motor head.
Plug the cable into the power outlet:
Hold the nozzle over a drain, press the rocker switch in the direction of
the spray suction nozzle symbol ”
” and turn
the rotary switch to ”I”
Press the shut-off valve to spray out the water that was poured in.
Rinse the vacuuming hose, pipes and nozzles by vacuuming up some
clean water.
Then clean the two containers and allow the appliance components to
dry well. Dismantle the spray vacuuming components as described
under ”After spray vacuum cleaning”.
Hygiene when changing filters and emptying the dust container
Hygiene gloves should be used when changing all of the filter systems
in the appliance (e.g. paper filter, fine paper filter) and when emptying
and cleaning the dust container. These are obtainable everywhere from
the relevant retailers.
Summary of Contents for VAMPYR Multi
Page 2: ...32 ...
Page 29: ...59 Wet and dry multi purpose nozzle ET no 668 900 830 Bevelled pipe nozzle ET no 668 900 828 ...
Page 30: ...118 ...
Page 31: ......
