English
109
Defect
Cause
Solution
Distorted or
flickering
picture
The disc is dirty.
Remove the disc from the disc tray and clean
the disc.
The disc is scratched.
Use a different disc.
The disc is warped.
The remote
does not work
There are no batteries in the remote.
Insert 2 batteries into the battery compart-
ment.
The batteries have run out.
Replace both batteries.
The remote is not directly pointing at the
remote sensor on the front of the machine.
Point the remote directly at the remote sensor
on the front of the machine.
The remote is out of range of the machine.
The coverage of the remote is NO MORE THAN
7 METRES to the remote sensor on the front of
the machine.
The machine is locked.
Switch off the machine and disconnect it from
the mains. Then connect the machine again to
the mains and switch it back on.
symbol
appears on the
screen
The wrong function has been selected.
Refer to the user manual.
Technical Data
Supported disc formats:
DVD, VCD, CD, MP3, DVCD, SVCD, CD-R, MPEG4
Video Format:
MPEG2 for DVD and MPEG1 for VCD
Audio Format:
MPEG1, MPEG2, PCM, Stereo
Signal Output:
Video Format: PAL, NTSC, AUTO
Video Output: 1.0Vp~p
Audio: Stereo, 1 ~ 2V (RMS)
Outputs:
Video- Output:, Audio- Output:,
OPTICAL OUTPUT, Component Output
COAXIAL OUTPUT and SCART OUTPUT
Inputs:
USB, Mutimedia memory card
Power supply:
~ 220-240V/50Hz
Max. Power consumption:
25W
Frequency response:
20Hz-20KHz
± 3dB
Signal/Noise ratio for Audio-Signal:
≥
80 dB
Operating Conditions:
Temperature: 5 °C ~ 35 °C
Installation: on a flat and level surface
Please note that the system does not support some MPEG4 discs with the formats: *.rm/*.ra/*.ram/*.rmm. Take this
into account before buying discs.
The technical data serves only as a reference and may be changed without notice.
