English
82
Using the remote
• Point the remote directly at the remote sensor on the front of the machine – not at the connected devices.
• The coverage of the remote is no more than 7 metres to the remote sensor on the front of the machine.
• The coverage of the remote also depends on the lighting in the room.
• Glare (sun or artificial light) must not fall directly on the remote sensor. Glare can have a negative affect on the
effectiveness of the remote.
• Please ensure that no obstacles lie between the remote and the remote sensor on the front of the machine.
• Do not use remotes from several devices at the same time, since they may have a negative effect on each other.
• Only press button at a time on the remote.
• High voltage devices and devices which emit high frequency signals can negatively influence the functions of
the remote.
Disposal of batteries
If you replace the batteries, ensure that the used batteries are disposed of in accordance with the applicable
regulations. Do not dispose of the batteries with domestic waste. When changing the batteries, dispose of them in
accordance with the applicable regulations.
They should be deposited at the collection point provided. Only by doing this can they be safely disposed of in an
environmentally friendly manner. Do not bury or burn the batteries.
System Operation
Function buttons on the front of the machine
The function buttons on the front of the device serve the same function as the corresponding buttons on the
remote. Details can be found in the following sections.
Basic functions
POWER : Switch device on and off
1. Before you switch on the DVD system, check if all elements of the system and all external devices (e.g. a televi-
sion and /or an audio device) are correctly and securely connected to one another. Then, plug the mains plugs
from all devices into the wall sockets and switch on the connected devices.
2. Press the POWER button on the front of the system to switch the device on or off.
DVD, FM, USB/DVD/CARD: Select operating mode
Since you can use the DVD system as a DVD-Player, Radio or Playback system for connected memory devices such
as a USB drive or memory card, you must always select the correct operating mode for each of these options.
• To use the system as a DVD-Player, press the DVD button before starting to play a disc.
• To use the system as an FM radio, press the FM button.
• If you have connected a USB device to the USB connection (USB Port) or a memory card to the memory card
reader, press the USB/DVD/CARD button to select one of the available media using the Navigation buttons
▲
or
▼
Then confirm your selection with the PLAY/ENTER button.
See the following chapter for details.
