AEG LWM8C1612S, User Manual

Page: 27 / 48

desired delay time. The indicator
comes on.
2. Touch the Départ/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The PROSENSE estimation
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Départ/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Départ Différé button
repeatedly until the display shows .
3. Touch the Départ/Pause button again
to start the programme immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Départ/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Départ Différé button
repeatedly until the display shows the
desired delay time.
3. Touch the Départ/Pause button again
to start the new countdown.
10.9 The ProSense load
detection
After touching the Départ/Pause button:
1. The detergent percentage indicator
goes off, the indicator flashes.
2. The ProSense starts the laundry load
detection to calculate the real
programme duration. The time dots
flash.
3. After about 15 minutes the display
shows the new programme duration:
the time dots stop flashing.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
10.10 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
MIX
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
If you select the Vapuer programme the
steam phase indicator comes on.
10.11 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button Départ/Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Départ/Pause
again.
The washing programme continues.
ENGLISH 27