AEG LWM8C1612S, User Manual

Page: 41 / 48

Problem Possible solution
You cannot open the ap‐
pliance door.
• Make sure that a washing programme that ends with water
in tub, has been selected.
• Make sure that the washing programme is finished.
• Set the drain or the spin programme if there is water in the
drum.
• Make sure that the appliance receives electrical power.
• This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
If you need to open the door, please read carefully "Emer‐
gency door opening".
The appliance makes an
unusual noise and vi‐
brates.
• Make sure the levelling of the appliance is correct. Refer to
"Installation instruction".
• Make sure that the packaging and/or the transit bolts are re‐
moved. Refer to "Installation instruction".
• Add more laundry in the drum. The load may be too small.
The programme duration
increases or decreases
during programme exe‐
cution.
• The ProSense function is able to adjust the programme du‐
ration according to the type and the laundry load size. Refer
to "The ProSense load detection" in "Daily Use" chapter.
The washing results are
not satisfactory.
• Increase the detergent quantity or use a different detergent.
• Use special products to remove the stubborn stains before
you wash the laundry.
• Make sure that you set the correct temperature.
• Decrease the laundry load.
Too much foam in the
drum during the washing
cycle.
• Reduce the quantity of detergent.
After the washing cycle,
there are some detergent
residues in the dispenser
drawer.
• Make sure that the flap is in the correct position (UP for
powder detergent - DOWN for liquid detergent).
• Make sure you have used the detergent dispenser accord‐
ing the indications given in this user manual.
The drum is empty and
the display shows there
is some weight in.
• Press the Marche/Arrêt button to deactivate the appliance
and activate it again to set a tare.
The drum is full but the
display shows 0.0 kg.
• You loaded the laundry before activating the appliance.
Press the Marche/Arrêt button to deactivate the appliance.
• Empty the drum and follow the necessary steps. (Refer to
"Loading the laundry")
The appliance does not
dry or does not dry cor‐
rectly.
• Turn the water tap on.
• Make sure the drain filter is not clogged.
• Reduce the laundry load.
• Make sure you have set the correct cycle. if necessary, set
again a short drying time.
ENGLISH 41