AEG LWM8C1612S, User Manual

Page: 24 / 48

9.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Départ Différé and
the Gain de temps buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the
Température button and the Options
button once to add one extra rinse.
appears on the display.
• Simultaneously touch the
Température button and the Options
button twice to add two extra rinses.
appears on the display.
• Simultaneously touch the
Température button and the Options
button three times to remove extra
rinses. The display only shows
.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme
BEFORE you put the
laundry in the drum.
10.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
10.3 Activating the appliance
and setting a programme
1. Press button Marche/Arrêt for a few
seconds to activate the appliance.
The programme dial is automatically set
on cotton programme and only the
Lavage indicator is on.
The indicator of Départ/Pause button
flashes.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the
programme duration.
3. If it is necessary, touch the
Température button and the
Essorage button to change the water
temperature and the spin speed.
4. If necessary, touch the related
buttons to add some options and/or
to set a delayed start.
The display shows the symbol of the set
option and/or the digit shows the delayed
time.
www.aeg.com 24