Instructions for use
23
Add Washing Detergent and/Care Agent.
3
Refer to the information on washing detergents and care agents, see
section ”Washing Detergents and Care Agents”.
0
1.
Open the washing detergent drawer:
grip inside the flap on the drawer at the
bottom (1) and pull out the drawer as
far as it will go (2).
2.
Fill with washing detergent/
care agent
3.
Push the drawer fully in.
3
If using Liquid Detergent/Tabs:
Add liquid detergent/tabs in the amount recommended by the washing
detergent industry. Follow the instructions on the detergent package.
Compartment for in-wash stain
treatment
Compartment for main washing
powder
(If you use water softener and need the
right compartment for the pre-wash /
soaking agent, add the water softener
to the main washing detergent in the
left compartment.)
Compartment for liquid care agent
(Conditioner, finisher, starch)
Attention!
Fill the compartment up to the MAX mark.
If necessary, dilute viscous agent up to the MAX mark,
and dissolve powder starch.
Note:
It is normal for a small amount of water to
be left in the compartment for liquid conditioner;
this will not affect the wash results.
Compartment for pre-wash agent/soaking agent
only for additonal programs PRE WASH (PRELAV.)
and SOAKING (TREMPAGE)
or for water softener
