AEG KO-LAVAMAT 88830 Page 17 User Information Download | Manualshive

Page: 17 / 56

background image

Instructions for use

17

Washing Types and Care Codes

The care codes help you choose the correct washing program. The
washing should be sorted according to type and care code. The temper-
atures stated in the care codes are all maximum values.

Cottons

ç

Textiles made of cotton and linen with this care code are insensitive to
mechanical stress and high temperatures. The program COTTONS/LINEN
(BLANC/COULEURS) is suitable for this type of washing.

Linen

è ë

Textiles made of cotton and linen with this care code are insensitive to
mechanical stresses. The program COTTONS/LINEN (BLANC/COULEURS)
is suitable for this type of washing.

Easy-Care Garments

ê í

Textiles such as finished cottons, cotton mixtures, viscose and synthet-
ics with this care code require mechanically more mild treatment. The
program EASY-CARES/EASY IRON (MIXTES/SANS REPASSAGE) is
suitable for this type of washing.

Delicates

ì

Textiles such as layered fibres, microfibres, viscose, synthetics and cur-
tains with this care code require very gentle treatment. The program
DELICATES (DELICAT) is suitable for this type of washing.

Wool, Silk and Extremely Delicate Washing

9 ì ï

Textiles such as wool, wool blends and silk with this care code are par-
ticularly sensitive to mechanical stresses. The WOOL (LAINE)/

P

(Hand-

wash) and SILK (SOIE)/

P

(Handwash) programs are suitable for this

type of fabric.

Attention!

Textiles with the care code

ñ

(Do not wash!) must not be

washed in the washing machine!

«
...
15
16
17
18
19
...
»

Summary of Contents for KO-LAVAMAT 88830

























































Reviews:

No comments

Related manuals for KO-LAVAMAT 88830

Brand: Dacor Pages: 24

Brand: Dacor Pages: 2

Brand: Dacor Pages: 3

Brand: Dacor Pages: 24

Brand: Dacor Pages: 28

Brand: NEFF Pages: 52

Brand: Kärcher Pages: 244

Brand: Winterhalter Pages: 11

Brand: Daewoo Pages: 50

Super 20 CL8761

Brand: Speed Queen Pages: 41

Brand: Buffalo Pages: 20

Brand: Sammic Pages: 32

Brand: Kuppersberg Pages: 148

TX 300 10-130.2

Brand: Interpump Group Pages: 26

Brand: Hansa Pages: 40

Brand: Hansa Pages: 38

Brand: Viking Pages: 10

Brand: Electrolux Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands