English
74
Screen Saver
The unit can display a freeze frame without a time limit. This can cause
damage to the screen. Activate the screen saver to protect the screen.
Select between the following options:
On:
■
Screen saver is activated (default).
Off:
■
Screen saver is deactivated.
Analog Audio Setup Page
Downmix
Modifies the characteristic of the speaker output:
L/R:
■
Select this setting i to play the DVD in Pro Logic Dolby Stereo
Effect. Plays a realistic 2-channel stereo effect.
Stereo:
■
Select this setting if you wish to play a DVD recorded in
5.1-audio-format in 2-channell-stereo sound.
Dolby Digital Setup
Dual Mono
The sound output usually takes place stereo. You may choose a mono
output instead of a stereo output
Stereo:
■
The output is in stereo (default setting).
L-Mono:
■
The output is in mono. On all speakers the signal is emitted from
the “left“ stereo channel.
R-Mono:
■
The output is in mono. On all speakers the signal is emitted from
the “right“ stereo channel.
Mix Mono:
■
The output is in mono. On all speakers the signal is emitted from
the “both“ stereo channel.
Dynamic
This concept “Dynamic Range“ describes the ratio from the lowest to
the loudest sound. With a high dynamic range very low, as well as very
loud sounds are emitted.
This may cause playback issues. In the event you view a DVD within
a relatively noisy you may adjust the volume to hear low volume
passages, however, it bears the disadvantage that louder passages are
unacceptably loud. Suggestively you may compromise (reduce) the
dynamic range and increase the output volume.
FULL -1/8:
■
The dynamic ratio is compromised from 1/8 to maxi-
mum (FULL).
OFF:
■
The dynamic ratio is not compromised (default setting).