1.
Turn the lamp glass cover
counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with a
suitable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4.
Install the glass cover.
11.9
Removing the drawer
WARNING!
Do not keep flammable
items (such as cleaning
materials, plastic bags, oven
gloves, paper or cleaning
sprays) in the drawer. When
you use the oven, the drawer
can become hot. There is a
risk of fire
The drawer below the oven can be
removed for cleaning.
1.
Pull the drawer out until it stops.
2.
Lift the drawer slightly, so that can be
lifted upwards at an angle of the
drawer guides.
To install the drawer, follow the
procedure in reverse.
12.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1
What to do if...
Problem
Possible cause
Remedy
You cannot activate the ap-
pliance.
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
Check if the appliance is cor-
rectly connected to the elec-
trical supply.
You cannot activate the ap-
pliance.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
You cannot activate or oper-
ate the hob.
You touched 2 or more sen-
sor fields at the same time.
Touch only one sensor field.
You cannot activate or oper-
ate the hob.
STOP+GO function oper-
ates.
Refer to "Hob - Daily use"
chapter.
You cannot activate or oper-
ate the hob.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one
or more sensor fields.
Remove the object from the
sensor fields.
www.aeg.com
36