--------------------------------------------------------------------------------10/28--------------------------------------------------------------------------------
3.2.3
LED – LED control
With the command LED you can control the LED ring of the ARE DT1.
Input format:
LED
<SP>
parameter
<CR>
Output (example):
1
<CR>
Parameter:
PARAMETER
FUNCTION
0
off
1
on
2
Buzzer beeps,
LEDs flash
final state =initial
state
3.2.4
RST – reset
With the command RST the reader does a warmstart and loads the saved settings from the internal
EEPROM. The antenna field is off after the reset.
Input format:
RST
<CR>
Output (example):
ACK
<CR>
3.2.5
VER – version
With the command VER the reader sends the actual firmware version.
Input format:
VER
<CR>
Output (example):
AEG ID V1.22
<CR>
