Advantech WISE-4000 Series User Manual Download Page 93 | Manualshive

Page: 93 / 154

background image

85

WISE-4000 User Manual

Chapter 4

S

ystem

Configuration

c. Setup



Favorite Group

You can configure your favorite group including add one new device, modify or
delete one current device, sort current devices and diagnose connection to one
device.



Refresh Serial and Ethernet

ADAM.NET utility will refresh the serial and LAN network connection situation.



Add COM Ports

This option is used to add serial COM ports in ADAM.NET Utility. You won't
need to use this option for WISE-4000 modules.



Show TreeView

Check this option to display the Module Tree Screen area.



Allow Calibration

Check this option to allow calibration function enabled on AI/O module.

d. Help



Check Up-to-Date on the Web

It will automatically connect to support and download page of Advantech web-
site when it enabled. You can find and download the latest version of WISE-
4000 utility there.



About ADAM.NET Utility

The current version of ADAM.NET Utility is installed on your computer.

«
...
91
92
93
94
95
...
»

Summary of Contents for WISE-4000 Series



























































































































































Reviews:

No comments

Related manuals for WISE-4000 Series

Brand: FAAC Pages: 60

Brand: FAAC Pages: 68

Brand: Xantech Pages: 102

Brand: Panasonic Pages: 45

NEVERCOLD 70600

Brand: EASTMAN Pages: 11

Brand: Vestil Pages: 6

KPH 370.70 LIKT

Brand: rav Pages: 82

Brand: WAGO Pages: 46

Brand: Serenity Pages: 3

Brand: ICP DAS USA Pages: 21

Brand: Happ Pages: 42

Brand: facelift Pages: 8

Brand: M-E Pages: 72

Brand: AMGO Hydraulics Pages: 40

Brand: Idemia Pages: 74

Brand: Kelvinator Pages: 16

Brand: Contec Pages: 62

Brand: ESP Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands