Advantech WISE-4000 Series User Manual Download Page 56 | Manualshive

Page: 56 / 154

background image

WISE-4000 User Manual

48



Wireless Status

For the WISE-4000 Wireless Series, users can check the WLAN RSSI Level to know
the signal quality in Wireless Status field. And it also shows the MAC ID of the client
device.

If the module is in AP Mode, the WLAN RSSI Level and Refresh button will not be
shown.



Network Information

For the WISE-4000 Wireless Series, WLAN Mode (AP Mode / Infrastructure) will be
shown in Network Information. Here is an overview of the entire network configura-
tion. To configure the network configuration, click “Go to Configuration”.



Module Information

Here you can check the model name and the module description of the module. The
firmware version will also been shown here. At the end of the configuration web
page, you can see the version of the configuration web page. For normal release
module, the version of configuration web page will increase with the firmware ver-
sion, these have been updated at the same time.

To update the firmware version, go the “Firmware Version” section.

«
...
54
55
56
57
58
...
»

Summary of Contents for WISE-4000 Series



























































































































































Reviews:

No comments

Related manuals for WISE-4000 Series

Pure Link 1300 Series

Brand: lancer Pages: 20

Brand: Linak Pages: 33

Brand: FAIE Pages: 5

Brand: ICP DAS USA Pages: 156

Brand: Niko Pages: 48

Brand: Purelogic Pages: 60

Brand: MPMan Pages: 32

Brand: Reliable Pages: 2

Brand: SereneLife Pages: 2

Brand: Eaton Pages: 2

Brand: TCS Pages: 12

Brand: golmar Pages: 44

Brand: SMAR Pages: 47

Brand: DEVI Pages: 2

Brand: M-system Pages: 3

AMETEK ORBIT ACS Series

Brand: Solartron Metrology Pages: 63

Brand: Zepro Pages: 23

Brand: Quanser Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands