Advantech WISE-4000 Series User Manual Download Page 94 | Manualshive

Page: 94 / 154

background image

WISE-4000 User Manual

86

4.3.1.2

Toolbar

There are 8 graphical icons for common used options of Menu on the toolbar.

Definition (from left to right)

1.

Open favorite group

2.

Save favorite group

3.

Search Modules

4.

Add Devices to Group

5.

Terminal for Command Testing

6.

Group Configuration

7.

Monitor Data Stream/Event

8.

Print Screen

4.3.1.3

Module Tree Screen

The Module Tree Screen locates on the left part of ADAM.NET utility operation win-
dow. There are four categories in this area:

Serial

All serial I/O Modules (ADAM-4000 and ADAM-5000 RS-485 serial modules) con-
nected to the host PC will be listed in this category.

Ethernet

All Ethernet I/O Modules (WISE-4000, ADAM-6000, ADAM-6100,and ADAM-5000
TCP modules) connected to the host PC will be listed in this category.

Favorite Group

You can define which devices listed in the three categories above into your personal
favorite group. This will make you easier to find your interested modules. Right click
on the WISE-4000 device item under the Favorite Group item and you can select Add
New Group to create a new group. After you create your own group, right click on
your group and Add New Device into your group. You can also select Diagnose con-
nection to check the communication.

ADAM-4500_5510 Series

This is a DOS interface utility for remote controllers such as ADAM-4500 and ADAM-
5510 series.

Wireless Sensor Networks

All wireless I/O Modules (ADAM-2000 modules) connected to the host PC, through
wireless gateway, will be listed in this category.

4.3.1.4

Main Operation Screen

Main Operation Screen located on the right side of utility includes I/O status display
and function setting. You can select different items in Module Tree Screen, and then
Main Operation Screen will change dependently. You can do all configurations and
test in this area.

In Information page (after clicking Ethernet), you can configure Connection/Send/
Receive/Scan Timeout. The supervisor password is a shortcut to let you enter a
password at one time which's applied for certain modules, so you don't need to enter
the same password for each module when you check it.

«
...
92
93
94
95
96
...
»

Summary of Contents for WISE-4000 Series



























































































































































Reviews:

No comments

Related manuals for WISE-4000 Series

Brand: iHome Pages: 17

Brand: Vimar Pages: 40

Vision BT-A02 RF

Brand: Watts Pages: 19

Brand: WAFER Pages: 11

Brand: greenPRO Pages: 26

Brand: Contec Pages: 15

TrueAlert ES Series

Brand: Simplex Pages: 4

Brand: facelift Pages: 8

ThunderFog Series

Brand: Task Force Tips Pages: 20

BNI EIP-507-005-Z040

Brand: Balluff Pages: 2

sensazone SZ/ASK

Brand: Cistermiser Pages: 16

Brand: Sel Pages: 12

ELVOX 0930/000.04

Brand: Vimar Pages: 6

Brand: Revo Pages: 6

Brand: CyberData Pages: 124

Brand: Dino lift Pages: 121

Brand: Valcom Pages: 4

Brand: Panasonic Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands