Advantech WISE-4000 Series User Manual Download Page 49

Page: 49 / 154

WISE-4000 User Manual

Chapter 3

ardware

Installation

3.3

Wiring & Connections

This section introduces basic information on wiring the power supply, I/O units, and
Ethernet connection.

3.3.1

Power Supply Wiring (Not for WISE-4012E)

The system of WISE-4000 is designed for a standard industrial unregulated 24 V

power supply. For further application, it can also 10 to +30 V

of power

input, 200mV peak to peak of power ripple, and the immediate ripple voltage should
be maintained b10 and +30 V

Screw terVs and -Vs are for power supply wiring

Figure 3.10 Power Supply Wiring

3.3.2

USB Power (WISE-4012E Only)

The system of WISE-4012E IoT Developer Kit is designed for a standard Micro-B
USB 5V

power supply. Use the provided USB power cable to power up the mod-

ule. Insert the Micro-B USB end to the USB port on the side of the module, and insert
another end to Type-A 5V

USB port such as a PC, notebook, USB power adapter,

USB power bank.

Note!

The wires used should be at least 2 mm.

Note!

The wider or flared part of the USB Micro-B connector is at the front side
of the module, please make sure the direction of the cable before insert-
ing it into the module to prevent the damage to the USB port.

Some USB power banks will automatically switch off, in this case, use a
standard USB power instead.

Summary of Contents for WISE-4000 Series



























































































































































Search results

Summary of Contents for WISE-4000 Series

Reviews:

Related manuals for WISE-4000 Series

Brands by name

Popular brands

Advantech WISE-4000 Series, User Manual

Search results

Summary of Contents for WISE-4000 Series

Reviews:

Related manuals for WISE-4000 Series

Brands by name

Popular brands