Advantech WISE-4000 Series User Manual Download Page 87

Page: 87 / 154

WISE-4000 User Manual

Chapter 4

ystem

Configuration

4.2.8

Configuring Cloud Server (WISE-4000 wireless series only)

Make sure the WISE-4000 module is able to access the Internet, and the device
that’s going to configure the WISE-4000 module is within the same IP domain
as the WISE-4000 module

Go to the Cloud tab of Configuration.

Select Dropbox as the cloud server.

The browser will open a new window for Dropbox. Enter your Dropbox account
information including E-mail and Password, then click “Sign in”.

Note!

The following instructions use Dropbox.

Make sure Dropbox provide

their service in your region or find an alternative public cloud service.

Summary of Contents for WISE-4000 Series



























































































































































Search results

Summary of Contents for WISE-4000 Series

Reviews:

Related manuals for WISE-4000 Series

Brands by name

Popular brands

Advantech WISE-4000 Series, User Manual

Search results

Summary of Contents for WISE-4000 Series

Reviews:

Related manuals for WISE-4000 Series

Brands by name

Popular brands