Advantech UNO-3072L, User Manual, Page: 30 / 64

UNO-3072L User Manual 22
2.6 Onboard Isolated Digital Output
The UNO-3072Lhas 4 isolated DO channels designated DO0 ~ DO3.
2.6.1 Pin Assignments
The connector type of UNO-3072Lis plug-in screw terminal block that
enables you to connect to field I/O devices directly without additional
accessories. Figure 2.7 and Table 2.9 show its pin assignment as well as
signal description.
Figure 2.6: Digital Output Connector Pin Assignments
2.6.2 Power On Configuration
Default configuration after power on or hardware reset is to set all the iso-
lated digital output channels to open status (the current of the load can’t be
sink) so that users need not worry about damaging external devices during
system startup or reset. When the system is hot reset, then the status of iso-
lated digital output channels are selected by jumper JP7. Table 2.10 shows
the configuration of jumper JP7.
Note: Please refer to Figure A.4 and A.5 for location of JP7
Table 2.9: Digital Output Connector Signal Description
Signal Name Reference Direction Description
DO <0...3> COM Output Isolated DO signals
COM - - DI, DO isolated
ground