UNO-3072L User Manual
20
2.5.5 Interrupt Control Register
The Interrupt Control Register controls the function and status of each
interrupt signal source. Table 2.5 shows the bit map of the Interrupt Con-
trol Register. The register is readable/writeable register. While being writ-
ten, it is used as a control register; and while being read, it is used as a sta-
tus register.
DI0EN & DI1EN: DI0 & DI1 Interrupt disable/enable control bit
DI0TE & DI1TE: DI0 & DI1 Interrupt triggering edge control bit
DI0F & DI1F: DI0 & DI1 interrupt flag bit
2.5.6 Interrupt Enable Control Function
The user can choose to enable or disable the interrupt function by writing
its corresponding value to the interrupt disable/enable control bit in the
interrupt control register, as shown in Table 2.6.
Table 2.5: Interrupt Control Register Bit Map
Base Address
7
6
5
4
3
2
1
0
202H
R/W
Interrupt Enable Control/Status Register
DI1EN DI0EN
203H
R/W
Interrupt Triggering Edge Control/Status Register
DI1TE
DI0TE
207H
R/W
Interrupt Flag/Clear Register
DI1F
DI0F
Table 2.6: Interrupt Disable/Enable Control Bit Values
DI0EN & DI1EN
Interrupt Disable/Enable Control
0
Disable
1
Enable
Summary of Contents for UNO-3072L
Page 16: ...UNO 3072L User Manual 8 1 4 Chassis Dimensions Figure 1 1 Chassis Dimensions for C M 1GHz CPU...
Page 17: ...9 Chapter1 Figure 1 2 Chassis Dimensions for C M 1 5GHz or faster CPU...
Page 51: ...APPENDIX A System Settings and Pin Assignments...