Advantech PCL-843, Manual

Page: 12 / 36

6 PCL-843 User's Manual
Initial inspection
Depending on the option you ordered, you should find (in addition to
this manual) the following items inside the shipping container:
• PCL-843 Ethernet Card
• One T-connector for 10BASE-2
• One 3.5" diskette (software driver)
We carefully inspected the PCL-843 mechanically and electrically
before we shipped it. It should be free of marks and scratches and in
perfect working order on receipt.
As you unpack the PCL-843, check it for signs of shipping damage
(damaged box, scratches, dents, etc.). If it is damaged or it fails to
meet specifications, notify our service department or your local sales
representative immediately. Also notify the carrier. Retain the ship-
ping carton and packing material for inspection by the carrier. After
inspection we will make arrangements to repair or replace the unit.
When you handle the PCL-843, remove it from its protective packag-
ing by grasping the rear metal panel. Keep the anti-vibration packing.
Whenever you remove the card from the PC, store it in this package
for protection.
Warning! Discharge your body’s static electric charge by
touching the back of the grounded chassis of the
system unit (metal) before handling the board. You
should avoid contact with materials that hold a
static charge such as plastic, vinyl and styrofoam.
Handle the board only by its edges to avoid static
damage to its integrated circuits. Avoid touching the
exposed circuit connectors.