EKI-9502G Series User Manual
19
Make sure the power is not connected to the device or the power converter before
proceeding.
1.
Loosen the screws securing the connector to the power cable receptor.
2.
Remove the power cable from the device.
Figure 2.21 Removing the Power Cable
2.2.7.5
Standard M12 A-Coded 4 Poles Pin Assignment
This section describes the proper connection of the 24, 48, 72, 96 and 110 V
DC
to the
DC power connector on the switch. The DC input connector is located on the left side
of the front panel. The power terminals are connected as shown in the following
figure. Simply align the keyed female connector to the male connector and twist the
threaded to secure.
Figure 2.22 Standard M12 4 Poles Male DC Power Input Connector
1
2
Pin
Description
1
V1-
2
V1+
3
V2+
4
V2-
2
1
3
4