background image

1

DI-514

2.4GHz Wireless

Router

5V DC Power Adapter

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and

specifications subject to change without notice. DI-514.  10242003

Before You Begin

1.

If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).

2.

It’s best to use the same computer that is connected to your modem for configuring
the DI-514 Wireless Router. The DI-514 acts as a DHCP server and will assign all
the necessary IP address information on your network. 

See Appendix at the end

of this Quick Installation Guide or the Manual on the CD-ROM for setting each
network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-514 2.4GHz Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (Straight Through) Cable

If any of the above items are missing, please contact your reseller.

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.

        Using a power supply
         with a different voltage
rating will damage this
product and void the warranty

Summary of Contents for DI-514 - Wireless Router













Reviews: