Advantech EKI-5624PI, User Manual

Page: 49 / 64

40 EKI-5729PI & EKI-5624PI User Manual
4. Click Apply to configure the device.
Figure 4.9 Changing Device Name
The device name is changed.
Setting Modbus/TCP Idle Time
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select the System tab.
3. Locate the Modbus/TCP Host Idle Time(s) field.
4. Enter a variable representing the idle time for the Modbus/TCP host function.
ProView provides the following information to SCADA through Mod
bus/TCP.
– Vendor Name
– Production Name
– Firmware Version
– Ethernet MAC Address
– IP Address
– Port Status
– Port Speed
– Flow Control
– Port Description
– Link Up Counter
– PoE Status
– Tx Packets Counter
– Rx Packets Counter
– Tx Error Packets Counter
– Rx Error Packets Counter