Advantech EKI-5624PI, User Manual

Page: 51 / 64

42 EKI-5729PI & EKI-5624PI User Manual
5. In the SNMP Trap Setting selection, enter the IP address of the SNMP trap
server.
Figure 4.11 Setting SNMP
Setting PoE
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select the PoE tab.
3. Select the radio-box next to the target port then click on it to check and enable
the PoE function on that port. To disable the PoE function on the port, click on
the radio-box to unselect it.
4. Click Refresh to update the PoE status for each port. Each port displays the
current enabled or disabled state in addition to the following information.
– Voltage (V)
– Current (mA)
– Power (W)