Advantech EKI-1511L, User Manual

Page: 65 / 87

54 EKI-1511L User Manual
6.5.3 Advanced
The Advanced menu allows for the configuration of the time delay, buffer data size
and FIFO size for port configuration.
To access this page, click Port Configuration > Advanced .
Figure 6.6 Port Configuration > Operation
The following table describes the items in the previous figure.
6.6 Monitor
The EKI-1511L device server allows monitoring of the serial ports’ status. The serial
port’s operation mode and status is available for display. The IP address of the host
PC which is communicating with serial port is also displayed.
The Monitor function provides a method to monitor the serial device server’s status
(operation mode, baud rate, data bits, stop bits, parity and RTS/XON).
Monitoring information is divided into three main message types: Setting/Statistic/
Connected IP.
Item Description
Ignore Purge Click the option to purge the serial port when the serial port opens
first time.
Disable Character
Timeout Detection Click the option to disable the serial port character timeout
detection.
Disable Multiple
Connection Click the option to disable the multi-access function. Then only one
TCP connection is allowed on this serial port.
Enable BufferData Size Click the option to enter the value to queue data to become a
packet.
USDG Advanced Options (Flow Control will overwrite these options)
RTS Control Click the drop-down menu to select the status of RTS: ON, OFF,
Toggle By Connect or Toggle By Data.
Save Click Save to save the values and update the screen.