Advantech EKI-1511L, User Manual

Page: 61 / 87

50 EKI-1511L User Manual
6.2.2 Accessing the Web Page via Web Browser
Once the device is installed and connected, power on the device. The following
information guides you through the logging in process.
1. Launch your web browser on the PC.
2. In the browser’s address bar, type the device’s default IP address (Eth1:
10.0.0.1).
The main menu is shown.
6.3 System
You can change the Device Name and Device Description on this page. You can also
enable or disable the Telnet and SNMP functions. Moreover, you can set the Time
zone related settings.
To access this page, click System .
Figure 6.2 System
The following table describes the items in the previous figure.
6.4 Ethernet Configuration
Choose Eth 1 in the Ethernet Configuration page. Enter the corresponding values for
your network environment. Remember press Save after fill in all values.
Item Description
Firmware version Displays the current firmware version of the device.
Revision number Displays the revision number of the device.
Device Name Enter the device name: up to 31 alphanumeric characters.
Device Description Enter the device description.
VCOM Ignore Device ID Click Enabled or Disabled to enable or disable VCOM ignore
device ID.
Telnet Click Enabled or Disabled to set remote access through the
Telnet Service function.
SNMP Click Enabled or Disabled to define the SNMP daemon.
Save Click Save to save the values and update the screen.