Advantech EKI-1511L, User Manual

Page: 24 / 87

EKI-1511L User Manual 13
7. Insert the screws into the wall sinks. Leave a 2 mm gap between the wall and
the screw head to allow for wall mount plate insertion.
Figure 2.13 Securing Wall Mounting Screws
8. Align the wall mount plate over the screws on the wall.
9. Install the wall mount plate on the screws and slide in the direction to lock it over
the keyhole, see the following figure.
Figure 2.14 Wall Mount Installation
10. Once the device is installed on the wall, tighten the screws to secure the device.
Note!

Make sure the screws dimensions are suitable for use with the wall
mounting plate.

Do not completely tighten the screws into the wall. A final
adjustment may be needed before fully securing the wall mounting
plates on the wall.
8.0 mm
4.0 mm
2.0 mm
1
1 2