Advantech CA-6178F-00B1 User Manual Download Page 78

Page: 78 / 137

Chapter 5 LAN Configuration

5.3

Driver Installation

The PCA-6178's onboard Ethernet interface supports all major
network operating systems.

The BIOS automatically detects the LAN while booting, and assigns
an IRQ level and I/O address. No jumpers or switches are required for
user configuration.

The drivers and installation instructions are located in the following
directories of the utility CD:

• Dos: Drivers for DOS platforms

• Info: Installation instructions

• Nwserver: Drivers for Novell NetWare

• Wfw: Drivers for Windows 3.11 for Workgroups

Please refer to the text files in the Info directory for detailed informa-
tion about installing the drivers.

Note:

Operating system vendors may post driver updates

on their websites. Please visit the websites of OS
vendors to download updated drivers.

Summary of Contents for CA-6178F-00B1










































































































































Search results

Summary of Contents for CA-6178F-00B1

Reviews:

Related manuals for CA-6178F-00B1

Brands by name

Popular brands

Advantech CA-6178F-00B1, User Manual

Search results

Summary of Contents for CA-6178F-00B1

Reviews:

Related manuals for CA-6178F-00B1

Brands by name

Popular brands