Advantech AMT-70, Installation And Operation Manual, Page: 83 / 160

AMT-70/AMT-73/AMT-75 Installation and Operation
COLDFIRE port done by Greg Ungerer, gerg@snapgear.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
On node 0 total pages: 4096
……………….
MODULATOR: Initialization in progress()
M41T94 Real Time Clock Driver loaded
Resetting modulator/demodulator (LOW)
Command: powercyc 1
Initializing modulator/demodulator (HIGH)
……………..
DEMOD: Initialization in progress()
……
MOD: MOD_Init()
Command:
Execution Finished, Exiting …….
Figure 21: Booting the modem
5.5
Login to the modem
The logon to the AMT-70/73L modem from the serial port or Telnet in command line mode is described
below:
Command: ./msh
uClinux login:
root
Password:
AMT-70 Modem Software - V1.0
Copyright (c) ADVANTECHAMT 1998-2004, All Rights Reserved
AdvantechAMT 2002-2003, All Right Reserved
Shell invoked to run file: /sbin/msh.sh
Command: cd /sbin
AMT-70 Modem Control Shell
#
The default manufacturing login userid / password are:
Userid:
root -
Password:
adminop
Figure 22: Login to the modem in Command Line Mode (CLI)
83
After the logon is completed, the prompt character
#
shall appear. At this point the modem shell is
active and allows you to configure and control the modem.