AMT-70/AMT-73/AMT-75 Installation and Operation
4.2.5.5.6
The CONTROL/BUC submenu
The CONTROL/BUC submenu is used to sets up the BUC when this support is fitted on the modem.
The BUC power can be turned ON/OFF from the front panel. The BUC is controlled by the modulator
card on the modem. If the BUC status is changed, an event is recorded to the log. The REFERENCE
option can be turn ON/OFF the 10Mhz clock reference.
C
4.2.5.5.7
The CONTROL/LNB submenu
The CONTROL/LNB submenu is used to set up the modem ports and peripherals
.
This option appears if a demodulator is fitted on the modem. The POWER option controls the LNB
power status. The REFERENCE controls if the 10Mhz reference clock is used. The TONE option set
the 22kHz tone ON/OFF. Finally, the POLARIZATION sets the LNB polarization.
4.2.5.5.8
The CONTROL/LCD submenu
The CONTROL/LCD submenu is used to configure the LCD brightness and support a basic screen
saver for the LCD
.
The brightness setting is be set by selecting the option BRIGHNESS. The brightness level can be set
by using the numeric keys 1-8 or the up/down arrow keypad buttons.
The screen-saver is used to turn off the LCD. When [ENTER] is pressed the LCD is turned OFF.
Pressing any key after the LCD is turned off wake-up the LCD and restore the active state.
78
B U
P O W E R = O
F F
R E F E R E N C E = O F
F
L N B
P O W E R = O F F R E
C
F
F
E
R E
N
E
=
O
F
T
O
P
A
O
N
E
=
F
F
O L
R I S
A T
I O N
=
O
F
F
L C D
:
B
R
I G
H
N
E
S
S
S
C
R
A
E
E
N _
S
V
E
R
Summary of Contents for AMT-70
Page 34: ...AMT 70 AMT 73 AMT 75 Installation and Operation 34 This page has been left intentionally blank...
Page 35: ...AMT 70 AMT 73 AMT 75 Installation and Operation 35 This page has been left intentionally blank...
Page 36: ...AMT 70 AMT 73 AMT 75 Installation and Operation 36 This page has been left intentionally blank...