Operation
44 / 140
DLT-V72 Operating Instructions V2.50 Preliminary
7.4.
Operating states
Status of LEDs
DLT-V72 status
Supply voltage
Temperature
OFF
OFF
Initial state, idle time – waiting for a new
ignition signal or for the <Power> key after
switch-off; no voltage supply
OFF
FLASHING
Temperature sensor faulty
FLASHING
OFF
DLT-V72 is in standby mode (S3)
OFF
ON
Computer will only start if the temperature
in
the device
is in the range between -30 and
+59 °C again.
ON
OFF
Computer start-up/normal operational
state/shutdown delay time
ON
ON
Screen defroster active
ON
FLASHING
Ambient temperature lies outside of the
permitted range, i.e. < -30 or > +50 °C
