Operation
36 / 140
DLT-V72 Operating Instructions V2.50 Preliminary
7.
Operation
7.1.
Switching the DLT-V72 on/off
The following factors determine how the DLT-V72 can be switched on and off:
−
Is the DLT-V72 mounted on a vehicle and connected with the ignition signal?
−
What are the automatic shutdown settings that were defined in the DLoG Config configuration
program?
7.1.1.
Switch on
Switch the DLT-V72 on as follows, depending on the configuration:
Press the <Power> button.
Or: By applying the supply voltage.
Or: Through the ignition signal of the vehicle (depends on automatic shutdown settings).
Fig. 7.1: <Power> button of the DLT-V72
