Advantech-DLoG DLT-V72 Series Operating Instructions Manual Download Page 105

Page: 105 / 137

Electrical installation, cable connection, cable cover

108 / 140

DLT-V72 Operating Instructions V2.50 Preliminary

12.4.2. Ethernet cable



Plug the Ethernet cable into the associated port.



Fold open the round cable passage in the rubber seal.



Insert the Ethernet cable.



Secure Ethernet cable to the strain relief rail with cable clips and screws.



ATTENTION

Tighten the mounting screws sufficiently but on no account pinch or crush the cable.

If you do, the cables may break or the cable insulation may get damaged.

Fig. 12.6: Ethernet cable on the connector panel; secured to the strain relief rail

12.4.3. COM cable



Plug the required COM cable into the associated port.



Fold open the respective round cable passage in the rubber seal.



Insert the COM cable.



Secure the COM cable to the strain relief rail with cable clips and screws.



ATTENTION

Tighten the mounting screws sufficiently but on no account pinch or crush the cable.

If you do, the cables may break or the cable insulation may get damaged.

Fig. 12.7: COM cable on the connector panel; secured to the strain relief rail

Summary of Contents for DLT-V72 Series










































































































































Search results

Summary of Contents for DLT-V72 Series

Reviews:

Related manuals for DLT-V72 Series

Brands by name

Popular brands

Advantech-DLoG DLT-V72 Series, Operating Instructions Manual

Search results

Summary of Contents for DLT-V72 Series

Reviews:

Related manuals for DLT-V72 Series

Brands by name

Popular brands