advanio Wolf Series RS-485 User Manual Download Page 25

Page: 25 / 157

Wolf Series RS-485 Remote I/O Module

Wolf series Remote IO Module User's Manual

2.1.5 Connecting Communication Interface

Wolf M1B series modules follow the standard RS-485 to support communication.

The RS-485 port and placement as following figure Besides, the next figure is show

the RS-485 connection..

※

When DIN rail mounting with modules alongside and the mounting base are

connected to the dock connector RS485 Signals can enter from the first

module only and out from the last module only. It is prohibited to use the

intermediate module for the pick out to avoid communication instability.

※

If the base is not connected to the dock connector, then every module need to

be connected with input communication cables for communication.

RS-485

Summary of Contents for Wolf Series RS-485






























































































































































Search results

Summary of Contents for Wolf Series RS-485

Reviews:

advanio Wolf Series RS-485, User Manual, Page: 25 / 157

Search results

Summary of Contents for Wolf Series RS-485

Reviews: