www.advancedco.com
21
2.3.4.2.1 Modules
Screw the M3 Pillars supplied with the chassis plate into the required mounting holes. Fit the module to the
pillars with the supplied M3 Screws.
Cable clips can be inserted on the left hand side of the chassis to route and retain the LED and switch wiring.
2.3.4.2.2 PSE
The PSE modules fit directly the chassis plate and are fixed using four M3 screws. Fit the Mxs-049 to the upper
four holes and fit the Mxs-050 and Mxs-051 to the outer four holes.
Fit the terminal block to the enclosure using the two supplied M3 Screws and affix the integral earth lead to the
stud using the supplied M4 Nuts and Washers.
Affix the supplied warning label to the right of the terminal block.
The incoming AC cables can be tied down the the enclosure using one of the supplied cable ties.
2.3.4.3 Mimic Door
This option consists of an 8U panel door (with aperture) and a fascia plate. The fascia plate can be drilled and
screen printing for the required graphic indicator diagram.
Mimic area = 350 W x 295H
Hinge
Fascia
Plate
Order
separately
Summary of Contents for Mx-5101xR
Page 23: ...www advancedco com USER NOTES...
