Advanced Mx-5101xR, User Manual

Page: 14 / 24

www.advancedco.com
14
2.3.2 LED Modules
LED Indicator Modules are available with 50 (Column), 100 or 200 LED indicators. All Modules are 4U in height
(see also 6U Utility Module for additional mounting options). Order the required LED Module and the 4U
Mounting Plate separately.
A Panel can support up to 250 LED
indicators in total (or one 200 LED
module). An example (50 LED column
format) is shown opposite.
The Zone LED chassis plate is mounted
onto the 19” mounting frame using 4x M4
Nuts and washers.
Connect the ribbon cable to the display
card. Route the cable through the lower
hole in the left hand side of the panel
module enclosure and connect to the input connector (top) of the first LED module. Use the long ribbon cable
supplied with the 4U mounting plate instead of the cable supplied with the LED Module. Use the short ribbon
cable to connect between modules.
Connect the supplied ribbon cables between the modules.
Connect the earth lead fitted on each 19” 4U mounting frame
to the nearest suitable earth point in the enclosure.
Up to 5 modules
(250 LED)
100-LED Modules
50-LED (Column) Modules 200-LED Module