Advanced Mx-5101xR, User Manual

Page: 5 / 24

www.advancedco.com
5
1.2 Cautions and Warnings
S T O P
BEFORE INSTALLATION – Refer To the Ratings shown on the label inside
the product and to the ‘Specifications Chart’ in this document.
Please read this manual carefully. If you are unclear on any point DO NOT
proceed. Contact the manufacturer or supplier for clarification and guidance.
Only Trained service personnel should undertake the Installation,
Programming and Maintenance of this equipment.
This product has been designed to comply with the requirements of the Low
Voltage Safety and the EMC Directives. Failure to follow the installation
instructions may compromise its adherence to these standards.
A T T E N T IO N
O B S E R V E P R E C A U T IO N S
F O R H A N D L IN G
E L E C T R O S T A T IC
S E N S IT IV E D E V IC E S
This equipment is constructed with static sensitive components. Observe anti-
static precautions at all times when handling printed circuit boards. Wear an
anti-static earth strap connected to panel enclosure earth point. Before installing
or removing any printed circuit boards remove all sources of power (mains and
battery).
1.3 Description
The 5000R Series is a modular assembly rack mount version of the 5000 Series of Fire Alarm Control panels.
The panels and peripheral devices are housed in dedicated module assemblies designed to be installed into
standard 19” rack mount enclosures.
Enclosures are provided in different sizes to IP55 rating (IP30 with outer glass door open). In addition, the
module assemblies can be mounted into commercial rack mount enclosures.
This manual covers the installation of the rack mount 5000R, 5000VR Series Fire Alarm Control Panel
assemblies and enclosures only. For all other information:
Refer to Product Manual (Document No. 680-165) for all other information on installation and programming
of the panel.
Refer to the User Manual (Document No. 680-166) for details of how to operate the panel.
Refer to the appropriate protocol application note for further and specific information for each protocol.
Refer to individual power supply module, peripheral bus module or network peripheral module
documentation for detailed information on these items.
1.3.1 5000R Series
The 5100R is a Single Loop, Analogue Addressable Fire Alarm Control Panel.
The 5200R is a Two Loop, Analogue Addressable Fire Alarm Control Panel.
The 5400R is a Multiple Loop, Analogue Addressable Fire Alarm Control Panel with provision for up to four
loops.
All above models are designed for use with the Apollo (Discovery, Explorer, XP95 and Series 90) and Hochiki
(ESP).
1.3.2 5000VR Series
The 5100VR is a Single Loop, Analogue Addressable Fire Alarm Control Panel.
The 5200VR is a Two Loop, Analogue Addressable Fire Alarm Control Panel.
The 5400VR is a Multiple Loop, Analogue Addressable Fire Alarm Control Panel with provision for up to four
loops.
All above models are designed for use with the Advanced (AV) fire detection devices.
1.4 EN54 Functions
The EN54 functions and options with requirements are identical to standard 5000 Series Panels. Refer to the
Product Manual (Document No. 680-165) for information.